Android network troubleshooting guides
Direct, technically grounded steps for common WiFi, LAN, DNS, and connectivity problems.
How to Find All Devices Connected to Your WiFi on Android
Use a local network scan to build a current list of reachable devices, then verify unfamiliar results before changing router settings.
Read guideHow to Check if a Port Is Open from Android
Test the exact TCP port from the same network path as your phone, then distinguish an open service from filtering or a timeout.
Read guideHow to Ping an IP Address from Android
Send several ping requests to a local IPv4 address and evaluate reachability, round-trip time, variation, and packet loss together.
Read guideHow to Find the IP Address of a Device on Your Network
Scan the local subnet, identify the device by name, vendor, or behavior, and confirm the address before using it in another tool.
Read guideHow to Wake a PC from Android Using Wake-on-LAN
Enable Wake-on-LAN on the PC, record the wired adapter MAC address, and send a magic packet from the same reachable network.
Read guideHow to Check WiFi Signal Strength on Android
Use repeated signal observations in the exact locations that matter and compare relative dBm values rather than relying on the icon in the status bar.
Read guideHow to Find the Best WiFi Channel
Compare nearby channel occupancy, then choose a channel that reduces overlap while respecting the router band and local regulations.
Read guideHow to Run Traceroute on Android
Trace a destination, find where replies stop or latency begins to persist, and compare the result with ping and DNS before diagnosing the fault.
Read guideHow to Monitor Whether a NAS Is Online
Combine a stable NAS address with repeatable ping or service checks and treat the expected service, not discovery alone, as the availability signal.
Read guideHow to Test DNS from Android
Query the hostname using the current network resolver, compare with a trusted custom resolver, and separate DNS failure from host reachability.
Read guideAll tools
More tools in Network Toolkit
WiFi Scanner
The WiFi scanner helps you inspect the network currently connected to your phone and compare nearby access points.
Network Scanner
The network scanner discovers devices reachable on the local IPv4 network.
IP Scanner
The IP scanner checks addresses in a local IPv4 range and highlights hosts that respond.
Ping
Ping is a fast first check for whether a local host responds and how long packets take to return.
Port Scanner
The port scanner checks whether TCP services accept connections on a target.
Traceroute
Traceroute helps show where traffic travels and where replies stop along a network path.
Wake-on-LAN
Wake-on-LAN sends a magic packet addressed to a network adapter that is prepared to wake its computer.
SSH Client
The SSH client provides a line-oriented console for connecting to servers and network devices from Android.
SNMP Tool
The SNMP tool queries management information exposed by routers, switches, printers, and other compatible devices.
MQTT Client
The MQTT client helps test broker connectivity and topic traffic from an Android device.
Bluetooth / BLE Scanner
The Bluetooth and BLE scanner discovers nearby devices advertising over Bluetooth Low Energy, with optional classic discovery where supported.
Subnet Calculator
The subnet calculator converts an IPv4 address and prefix into the boundaries used for routing and address planning.
Keep a network toolbox in your pocket.
Network Toolkit is free on Google Play, needs no account and works on your local network.
